6.2.1Seaside Server Control Panel Menu Options
The Seaside Server Control Panel is the central control point for Seaside Servers. When the Seaside Server Control Panel is first opened it is empty, see Figure 44.
The menu on the control panel provides options to manage server adaptors and to configure the control panel. The options are:
Manage
Add adaptor... | Create a new server |
Start All | Start all the servers that are not currently running |
Stop All | Stop all the servers that are currently running |
Start | Start the selected server(s) |
Stop | Stop the selected server(s) |
Remove | Remove the selected server(s) — they must be in the stopped state |
Inspect | Open a VA Smalltalk inspector on the selected server |
Use new dispatcher | |
Clear configuration caches | |
Clear sessions |
Configure
Default port ... | The default port used when adding a server adaptor |
Control Panel refresh interval ... | The frequency of refreshing the control panel information. It is specified in seconds; a value of 0 turns off refresh. |
Reset to defaults | Reset the default port to 8080 and the refresh interval to 5 seconds |